Office renovation is an excellent way to customize or give your space a new look. However, remodeling and demolition might bring about a lot of dust which could quickly get to other areas of your company, disrupting office affairs through thick dust film formed on office furniture and other possessions.
So, you can contain dust while renovating and demolition by following several dust containment measures. Let’s find out what these measures are that you can take.
Table of Contents
1. Separate the workspace using dust barriers
When a renovation is ongoing in your office, especially open ones, you might not be able to close off the doors leading to other offices completely. So the best method would be to isolate the office where the renovation is ongoing by using Construction Site Walls and Dust Barriers.
This equipment allows you to create a dust-tight site along the floor and the ceiling without needing tape. If the renovation is limited to a closed office room, you can isolate that area to prevent grit and dust from going out. These can include:
- Sealing gaps around unutilized doors.
- Covering equipment in work areas to ensure HVAC systems don’t spread dust and grit throughout the premises.
- Placing plastic sheets across exposed sections that lead to other office areas.
- Closing utilized doors.
- Limiting entry and exit areas.
If possible, you should try opening the windows to ensure circulation within the renovating office. You can also hand a fan in the window to blow dust away.
2. Make plans for a single entry and exit point
You might separate the work area from other office areas. However, the renovation workers must still somehow enter and exit the premises. So, you need to limit the foot traffic by having only a single doorway and lock while you seal up other remaining access areas.
You should remove the door from its hinges and install a dust containment door with a zipper. Ensure the dust containment is always closed except when the renovation crew exits or enters the area.
3. Adjust the HVAC system.
If you own ducts as part of your office cooling and heating systems, ensure it’s not running when the renovation is ongoing. When possible, you should divert them away from the work area. Additionally, you can remove air condition units since they might get clogged up with dust.
4. Perform demolition in stages
If the office renovation needs a lot of demolition, you should start with an area apart from other sites, then move towards the separating wall. It would be best if you aimed to ensure the barrier between the office space is kept intact as long as you can.
Before removing the last wall, set up temporary plastic walls using thick plastic sheets or simple wooden frames.
That’s A Wrap
Dust can be very abundant during a renovation process, and this could be potentially hazardous. Though no solution can completely be dustproof, combining these methods can prevent most dust from getting out of the work area, which would make your final cleanup manageable.